- Member Since: September 5, 2023
- https://www.thekeylab.co.uk/saab-car-keys/
Description
Saab 9-3 Key Replacement's History Of Saab 9-3 Key Replacement In 10 Milestones
How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of steps that are unique to add a second ignition key. It requires dealer service using a handheld computer dubbed Tech-2. Then the transponder is replaced and a key have to be purchased.
It is a good idea to rotate your keys in order that one does not wear out more quickly than the other. This will also ensure that your keys remain in top shape.
Replacement Case
The new key fobs for keys are not like the older Saab keys. They have electronics that make it difficult to copy. This has made car theft considerably more difficult than it was twenty years ago. But, it has also made replacing lost keys a comparatively expensive undertaking.
Every owner of a Saab 9-3 needs to have at least two functioning keys. If one is lost it costs a lot to replace it in the vehicle because it requires replacing the CIM module and reprogramming the locking cylinders. Dealers will typically charge $100-$200 to complete this.
There are options to avoid these costly costs. Certain parts suppliers will utilize the code of a spare key to cut a brand new metal blade at a fraction what the dealer charges. The key must, however, be the same as the original to work correctly in your car.
Follow these steps to replace the case. You will need to have an open-faced screwdriver and a lot of patience. Using the screwdriver, slowly pry the plastic apart and separate the emergency keys from the case. Once new saab key has been opened take out all electronic components and put them back in the new case. Be sure to put the correct key and badge back into the case as well.
Replacement Battery
The Saab 9-3 replacement battery is a cheap part that can be easily and quickly replaced. Cyclone's YouTube video Cyd shows how to replace the remote fob battery in just four easy steps. This tutorial is compatible with any modern Saab key fob. However, the procedure may differ slightly.
This button is usually placed near the Saab logo on the back of the fob. This button is usually located on the back of the fob next to the Saab Logo. Next you will need the flathead screwdriver to insert into the small hole inside this button. This should be sufficient to let the fob case open so that you can replace the battery.
Once the new CR1632 battery is in place, you can reassemble the remote key fob and program it to your car. The whole process should not take more than an hour. It's a simple procedure that doesn't require special tools.
If you lose a key, the procedure will be more complicated but it is still able to be completed. The dealer needs to first determine the VIN of the vehicle and order the replacement TWICE module as well as key blade with the proper unique code. After that, they'll be required to cut the replacement key and then program it with an innovative software tool called MDI.
Replacement Key Fob
The key fob contains an internal battery that is used to lock and unlock your car. The batteries last for a certain time that is a long time, and they eventually fail. This is a typical issue that affects all cars and the good news is that you can replace the batteries in a majority of key fobs without having to replace the entire case. You can purchase replacement fobs on Amazon that include all the electronics already installed, so you can simply open the case and replace the batteries in the original case. It is important to keep in mind that you'll have to take out the emergency key first, and you can accomplish this by inserting the screwdriver of a small flathead into the slot in the middle of the case. The case will split once you rotate the screwdriver around it.
When you're ready to replace the keys make sure you have spare keys, because this can cut down the total cost by a substantial amount. If you have a spare, you can ask the dealer to cut an entirely new key and then program it to the car, which is much cheaper than replacing the whole key fob.
If you do not have a spare key, it is possible to add a second key to your car, but this will require a lot of research and effort. A second key can cost about a few hundred dollars and it also requires the programming of the car's computer. Professionals can accomplish this however, it's a costly option.
Replacement Ignition
As opposed to the earlier Saab automobiles, the current SAAB 9-3 models feature an upgraded alarm system that is built on a key code. This means that if you lose your only working key, adding another one can be very expensive as the car has to have a specific computer module installed, and it must also be specifically programmed to accept a new key. Most locksmiths can't do this and even dealers will charge hundred dollars just to program the new key!
If you've lost your sole working key the dealer will replace the computer in your car (known as the CIM or SAAB TWICE) in order to make a replacement, and they will charge top dollar for it. We can reprogramme the existing EEPROM on your car's computer to make it ready for an extra key. This will save you more than 50% of what you would have to pay the dealer.
If you've been a long-time owner of a 03-11 SAAB 9-3, you likely know that the ignition key isn't really all that durable. If the ignition key you have isn't functioning properly, it is time to look into replacing it. They can become very sticky and the buttons can fall off. Fortunately, replacing the ignition key isn't as difficult as it seems, and it can be done fairly quickly with the appropriate tools.